Due to the characteristics of corrosion resistance, good gloss, odorless, non-toxic, and high ignition point of the silicone oil component in the release film, the plastic film coated with the release film also has similar properties, such as good adsorption and adhesion of the product. Let's take a look at several knowledge issues that need to be understood when selecting high-quality release films: 1. Processing materials: The different processing materials used for release films also have significant differences in their quality. The material structure of the release film mainly consists of three parts, including the base paper substrate, lamination, and adhesive. Therefore, the differences in the types and amounts of adhesive, as well as the differences in the use of base paper substrate

How can we choose high-quality fluoride release membranes? Below, we will explain how to select fluorine release films from the following four aspects: Firstly, based on the characteristics of the prepared products, we will select: currently, most of the commonly used tapes in China are imported, and different tapes have different characteristics. This determines that we need to consider this aspect when selecting fluorine release films. After being pulled, the elongation of the fluorine film should be consistent with the fiber to prevent deformation or distortion caused by different stretching frequencies during the preparation process. 2、 Selection from production procedures: The focus here is whether to press or cut, which generally involves stamping or cutting

Fluorine release membrane, also known as fluorine membrane or ETFE, is mainly used to isolate sticky materials, such as silicon tape, PI tape, etc. It plays a role in protecting the adhesive from contamination and deterioration during production, storage, or transportation. Currently, the most widely used carriers are tape or adhesive products. So what factors will affect the quality of fluoride release membranes? 1、 The first factor that affects the smoothness of fluorine release film is smoothness, because if the surface smoothness of the paper is not enough, it will affect the printing gloss and dot reduction. Therefore, only by ensuring that the surface of fluorine release film has a good quality

PET release film is economically and environmentally friendly, and is increasingly widely used in various industries. But while it brings us benefits and convenience, it also brings some troubles because there may be some problems during use. So what are the manufacturer's issues that may arise during use and what precautions should be taken? 1. The cleanliness of the release film is currently an important factor that restricts the widespread use of high-quality PET release films in HDI production; Therefore, manufacturers or suppliers of high-quality and durable PET release films must operate in clean rooms when coating, winding, and cutting release films. The clean room must reach 100

Before understanding silicone gaskets, many people actually associate their main uses with them. It's not just as simple as you think. Different user needs are different, and it mainly depends on what you use them for. The scope of use of silicone gaskets is quite broad, and they are also used differently in different industries. Their main functions include the following categories. 1. Household silicone gaskets are commonly used in daily life, including beach silicone insoles, silicone meal mats, silicone seat cushions, silicone kitchen mats, and other daily gaskets. They are widely used,

How to choose soft and hard silicone gaskets? Silicone gasket is a common type of silicone product that has various applications, specifically related to the softness and hardness of the silicone gasket itself. The selection of soft and hard silicone gaskets has always been a concern. Today, Ruichangxing editor will analyze the techniques for selecting soft and hard silicone gaskets with everyone, and let's take a look together. The softness and hardness of the gasket can determine its various reasons, such as functionality, lifespan, sealing performance, and aging type. Of course, in addition to the raw material itself, silicone materials still have certain characteristic problems that cannot meet some products. Therefore, in daily customization of silicone gaskets

The application of professional PET release films in various fields has increased due to the unparalleled performance of PET release film products, which increasingly reflect their own advantages and are recognized by consumers. So in the release film market, there are different types of products, how should consumers choose high-quality PET release films? Below are the key points compiled by the editor of Ruichangxing Company for potential buyers to refer to. 1、 Pay attention to the thickness of the film. When selecting PET release film, it is important to pay attention to the selection of film thickness. Many strength indicators of films with uniform thickness are relatively qualified. The uneven thickness of the release film can also cause uneven pressure in printing production, resulting in

What is a PET release film? What are the characteristics of a professional PET release film? The editor of Ruichangxing mainly provides a detailed explanation for everyone. PET release film is a commonly used tool for heat transfer printing, as the surface has undergone special coating treatment, which provides excellent adsorption after printing and is not easily damaged. It comes in different thicknesses and models for consumers to choose from. The characteristics of PET release film are as follows: firstly, it has a wide range of applications, whether in industry or in daily life, which can be seen everywhere. Therefore, high-quality and low-cost PET release film also provides manufacturers with broad commercial development space. In the future development time, it will follow

There are generally three ways to apply release film, and each manufacturer can choose the appropriate method for production according to their actual needs. Do you want to know which one? So now let's learn about the similarities and differences of the four methods together. 1. Smooth roller coating: This is a release film coating method that uses two or more rollers to transfer. By adjusting the gap and speed ratio between each roller, the coating amount can be adjusted. The structure of this coating method is relatively complex. The processing and assembly accuracy of the glue roller, coating roller, traction roller, and scraper are required to be very high. Due to the use of high-precision light rollers for coating on this release film coating machine

Today, the editor of Ruichangxing will briefly introduce the solution to the problem of oily release surface of release film, hoping to be helpful to everyone. 1、 There is a noise during peeling, which is caused by excessive release force and uneven coating. There are many ways to determine whether to apply or not. The simpler one is to look at the film surface in the sunlight, and the coating effect of the film surface can be seen at a glance. For example, the surface of a release film produced by a South Korean company can be seen with speckled coating marks and the imagination of a rainbow. Everyone can take a look. 2、 Anti stripping is mainly caused by the unsatisfactory combination of release forces, which can be attributed to two reasons,

Fluorine release film is also silicone paper or anti stick paper, mainly used to isolate sticky objects. The main features are as follows: firstly, the moisture-proof and temperature resistance of fluorine release film. Contains silicone oil, which has a certain degree of temperature resistance, but this mainly depends on the use of the product and the choice of domestic and imported silicone oil. Generally, the temperature of silicone oil can reach around 150 degrees. 2、 Peeling force of fluorine release film: Peeling force refers to whether the product can be easily torn off, although there are strict testing procedures. Small slitting machines, currently mainly using national standards internationally, have a stripping force unit of grams. According to the different test results, it is generally divided into three programs,

Ruichangxing is a company that relies on quality for survival. The company conscientiously produces high-quality adjustable release film, with positive quality and high-quality service, which is trustworthy. The following are common problems and precautions for fluorine release films compiled by Ruichangxing editor: Firstly, pay attention to distinguishing the front and back sides of single-sided release films. As single-sided fluorine release films only have one side for release and the other side is for PET substrate, if the release film is used on the wrong side, it will cause the film to stick to the surface of the board after pressing, making it difficult to tear it off. There are the following methods to distinguish the front and back: 1. Use adhesive paper to stick the fluorine release film surface. If it can be adhered, it is the PET substrate surface, and the non adhered surface is the release surface; 2